dmesg - 2012-06-27 19:36
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 (Ubuntu 3.2.0-24.39-generic 3.2.16)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/ovecka-root--u11.10--cinnamon ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf8a7000 - 00000000bf9b8000 (usable)
[ 0.000000] BIOS-e820: 00000000bf9b8000 - 00000000bfa0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
[ 0.000000] BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 273232G/273232G, BIOS 7YET79WW (3.09 ) 11/19/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 23C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 9152MB, range: 64MB, type UC
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] total RAM covered: 8128M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 3, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 4, base: 9152MB, range: 64MB, type UC
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6520] f6520
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe00000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] kernel direct mapping tables up to bfe00000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023c000000
[ 0.000000] 0100000000 - 023c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 23c000000 @ bfabc000-bfac6000
[ 0.000000] RAMDISK: 3627c000 - 37136000
[ 0.000000] ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bfd5a1e8 00094 (v01 LENOVO TP-7Y 00003090 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfd5a300 000F4 (v03 LENOVO TP-7Y 00003090 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bfd5a6db 0F52E (v01 LENOVO TP-7Y 00003090 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfd8e000 00040
[ 0.000000] ACPI: SSDT 00000000bfd5a4b4 00227 (v01 LENOVO TP-7Y 00003090 MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bfd69c09 00052 (v01 LENOVO TP-7Y 00003090 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bfd69c5b 00078 (v01 LENOVO TP-7Y 00003090 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bfd69cd3 0003C (v01 LENOVO TP-7Y 00003090 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bfd69d0f 00038 (v01 LENOVO TP-7Y 00003090 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bfd69e62 00176 (v01 LENOVO TP-7Y 00003090 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfd69fd8 00028 (v01 LENOVO TP-7Y 00003090 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfd8d1fa 00568 (v01 LENOVO TP-7Y 00003090 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: DMAR 00000000bfb06000 000C8 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023c000000
[ 0.000000] NODE_DATA [000000023bffb000 - 000000023bffffff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf8a1
[ 0.000000] 0: 0x000bf8a7 -> 0x000bf9b8
[ 0.000000] 0: 0x000bfa0f -> 0x000bfac6
[ 0.000000] 0: 0x000bfdff -> 0x000bfe00
[ 0.000000] 0: 0x00100000 -> 0x0023c000
[ 0.000000] On node 0 totalpages: 2079224
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 764586 pages, LIFO batch:31
[ 0.000000] Normal zone: 20224 pages used for memmap
[ 0.000000] Normal zone: 1274112 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
[ 0.000000] PM: Registered nosave memory: 00000000bf9b8000 - 00000000bfa0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
[ 0.000000] PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
[ 0.000000] PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
[ 0.000000] PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
[ 0.000000] PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
[ 0.000000] PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
[ 0.000000] PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
[ 0.000000] PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023bc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042611
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/ovecka-root--u11.10--cinnamon ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8088396k/9371648k available (6567k kernel code, 1054752k absent, 228500k reserved, 6636k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2260.947 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.89 BogoMIPS (lpj=9043788)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004053] AppArmor: AppArmor initialized
[ 0.004054] Yama: becoming mindful.
[ 0.004805] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010312] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012272] Mount-cache hash table entries: 256
[ 0.012435] Initializing cgroup subsys cpuacct
[ 0.012442] Initializing cgroup subsys memory
[ 0.012451] Initializing cgroup subsys devices
[ 0.012454] Initializing cgroup subsys freezer
[ 0.012456] Initializing cgroup subsys blkio
[ 0.012463] Initializing cgroup subsys perf_event
[ 0.012493] Disabled fast string operations
[ 0.012499] CPU: Physical Processor ID: 0
[ 0.012500] CPU: Processor Core ID: 0
[ 0.012502] mce: CPU supports 6 MCE banks
[ 0.012511] CPU0: Thermal monitoring enabled (TM2)
[ 0.012515] using mwait in idle threads.
[ 0.014322] ACPI: Core revision 20110623
[ 0.024024] ftrace: allocating 27050 entries in 107 pages
[ 0.028078] DMAR: Host address width 36
[ 0.028082] DMAR: DRHD base: 0x000000feb03000 flags: 0x0
[ 0.028089] IOMMU 0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.028091] DMAR: DRHD base: 0x000000feb00000 flags: 0x0
[ 0.028096] IOMMU 1: reg_base_addr feb00000 ver 1:0 cap c0000020630270 ecap 1000
[ 0.028099] DMAR: DRHD base: 0x000000feb02000 flags: 0x1
[ 0.028104] IOMMU 2: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.028106] DMAR: RMRR base: 0x000000f8504c00 end: 0x000000f85053ff
[ 0.028620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069199] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.072003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Booting Node 0, Processors #1
[ 0.072003] smpboot cpu 1: start_ip = 99000
[ 0.008000] Disabled fast string operations
[ 0.160036] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160077] Brought up 2 CPUs
[ 0.160079] Total of 2 processors activated (9043.81 BogoMIPS).
[ 0.162035] devtmpfs: initialized
[ 0.164150] EVM: security.selinux
[ 0.164152] EVM: security.SMACK64
[ 0.164153] EVM: security.capability
[ 0.164164] PM: Registering ACPI NVS region at bfac6000 (45056 bytes)
[ 0.164164] PM: Registering ACPI NVS region at bfad8000 (16384 bytes)
[ 0.164164] PM: Registering ACPI NVS region at bfadf000 (159744 bytes)
[ 0.164164] PM: Registering ACPI NVS region at bfd0f000 (589824 bytes)
[ 0.164813] print_constraints: dummy:
[ 0.164846] RTC time: 5:39:43, date: 06/27/12
[ 0.164881] NET: Registered protocol family 16
[ 0.164909] Trying to unpack rootfs image as initramfs...
[ 0.165017] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.165020] ACPI: bus type pci registered
[ 0.165082] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.165085] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.183480] PCI: Using configuration type 1 for base access
[ 0.184649] bio: create slab at 0
[ 0.184746] ACPI: Added _OSI(Module Device)
[ 0.184748] ACPI: Added _OSI(Processor Device)
[ 0.184750] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.184752] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.186798] ACPI: EC: EC description table is found, configuring boot EC
[ 0.192331] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.233215] ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.233215] ACPI: Dynamic OEM Table Load:
[ 0.233215] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.233215] ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.233531] ACPI: Dynamic OEM Table Load:
[ 0.233534] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.292312] ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.292825] ACPI: Dynamic OEM Table Load:
[ 0.292828] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.324172] ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.324673] ACPI: Dynamic OEM Table Load:
[ 0.324675] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.344040] ACPI: Interpreter enabled
[ 0.344046] ACPI: (supports S0 S3 S4 S5)
[ 0.344067] ACPI: Using IOAPIC for interrupt routing
[ 0.356212] ACPI: Power Resource [PUBS] (on)
[ 0.361437] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.361493] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.361493] HEST: Table not found.
[ 0.361493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.361493] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.364061] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.364064] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.364067] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.364070] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.364072] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.364075] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.364091] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.364113] DMAR: Forcing write-buffer flush capability
[ 0.364114] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.364143] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[ 0.364184] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.364187] pci 0000:00:01.0: PME# disabled
[ 0.364207] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.364223] pci 0000:00:03.0: reg 10: [mem 0xf8504800-0xf850480f 64bit]
[ 0.364275] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.364278] pci 0000:00:03.0: PME# disabled
[ 0.364339] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.364397] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.364467] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.364524] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.364593] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.364652] pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f]
[ 0.364732] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.364758] pci 0000:00:1a.7: reg 10: [mem 0xf8504c00-0xf8504fff]
[ 0.364872] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.364878] pci 0000:00:1a.7: PME# disabled
[ 0.364909] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.364930] pci 0000:00:1b.0: reg 10: [mem 0xf8500000-0xf8503fff 64bit]
[ 0.365029] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.365034] pci 0000:00:1b.0: PME# disabled
[ 0.365062] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.365168] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.365172] pci 0000:00:1c.0: PME# disabled
[ 0.365203] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.365309] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.365313] pci 0000:00:1c.1: PME# disabled
[ 0.365347] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.365451] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.365456] pci 0000:00:1c.3: PME# disabled
[ 0.365487] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.365592] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.365597] pci 0000:00:1c.4: PME# disabled
[ 0.365628] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.365732] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.365737] pci 0000:00:1c.5: PME# disabled
[ 0.365771] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.365828] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.365898] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.365955] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.366026] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.366084] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.366165] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.366190] pci 0000:00:1d.7: reg 10: [mem 0xf8505000-0xf85053ff]
[ 0.366303] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.366309] pci 0000:00:1d.7: PME# disabled
[ 0.366334] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.366428] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.366603] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.366631] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
[ 0.366642] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
[ 0.366654] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
[ 0.366666] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
[ 0.366677] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
[ 0.366689] pci 0000:00:1f.2: reg 24: [mem 0xf8504000-0xf85047ff]
[ 0.366761] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.366765] pci 0000:00:1f.2: PME# disabled
[ 0.366789] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.366810] pci 0000:00:1f.3: reg 10: [mem 0xf8505400-0xf85054ff 64bit]
[ 0.366841] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.366921] pci 0000:01:00.0: [1002:95c4] type 0 class 0x000300
[ 0.366936] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.366947] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.366958] pci 0000:01:00.0: reg 18: [mem 0xf8000000-0xf800ffff]
[ 0.366996] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.367045] pci 0000:01:00.0: supports D1 D2
[ 0.367075] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.367078] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.367082] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.367086] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.367144] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.367245] pci 0000:03:00.0: [8086:4237] type 0 class 0x000280
[ 0.367287] pci 0000:03:00.0: reg 10: [mem 0xf8100000-0xf8101fff 64bit]
[ 0.367484] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.367491] pci 0000:03:00.0: PME# disabled
[ 0.372049] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.372057] pci 0000:00:1c.1: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.372122] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.372127] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.372132] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd7ffffff]
[ 0.372140] pci 0000:00:1c.3: bridge window [mem 0xdbf00000-0xdbffffff 64bit pref]
[ 0.372198] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.372203] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.372208] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.372215] pci 0000:00:1c.4: bridge window [mem 0xdbe00000-0xdbefffff 64bit pref]
[ 0.372386] pci 0000:04:00.0: [14e4:1693] type 0 class 0x000200
[ 0.372455] pci 0000:04:00.0: reg 10: [mem 0xf8200000-0xf820ffff 64bit]
[ 0.372875] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.372886] pci 0000:04:00.0: PME# disabled
[ 0.373028] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.373036] pci 0000:00:1c.5: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.373088] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607
[ 0.373112] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.373114] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.373133] pci 0000:15:00.0: reg 10: [mem 0xdbdff000-0xdbdfffff]
[ 0.373177] pci 0000:15:00.0: supports D1 D2
[ 0.373179] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373184] pci 0000:15:00.0: PME# disabled
[ 0.373211] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805
[ 0.373237] pci 0000:15:00.2: reg 10: [mem 0xdbdfec00-0xdbdfecff]
[ 0.373355] pci 0000:15:00.2: supports D1 D2
[ 0.373357] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373363] pci 0000:15:00.2: PME# disabled
[ 0.373392] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880
[ 0.373418] pci 0000:15:00.4: reg 10: [mem 0xdbdfe400-0xdbdfe4ff]
[ 0.373537] pci 0000:15:00.4: supports D1 D2
[ 0.373539] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373544] pci 0000:15:00.4: PME# disabled
[ 0.373570] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880
[ 0.373596] pci 0000:15:00.5: reg 10: [mem 0xdbdfe000-0xdbdfe0ff]
[ 0.373714] pci 0000:15:00.5: supports D1 D2
[ 0.373716] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373722] pci 0000:15:00.5: PME# disabled
[ 0.373796] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.373801] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
[ 0.373805] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbdfffff]
[ 0.373813] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.373817] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.373819] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.373822] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.373824] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.373827] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.373829] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.373926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.374028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.374058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.374082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.374108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.374135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.374164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.374188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.374453] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.374803] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.379307] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379371] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379434] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379497] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379559] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379621] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379683] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379745] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.379890] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.379896] vgaarb: loaded
[ 0.379897] vgaarb: bridge control possible 0000:01:00.0
[ 0.380006] i2c-core: driver [aat2870] using legacy suspend method
[ 0.380008] i2c-core: driver [aat2870] using legacy resume method
[ 0.380090] SCSI subsystem initialized
[ 0.380155] libata version 3.00 loaded.
[ 0.380210] usbcore: registered new interface driver usbfs
[ 0.380220] usbcore: registered new interface driver hub
[ 0.380250] usbcore: registered new device driver usb
[ 0.380338] PCI: Using ACPI for IRQ routing
[ 0.382625] PCI: pci_cache_line_size set to 64 bytes
[ 0.382758] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.382760] reserve RAM buffer: 00000000bf8a1000 - 00000000bfffffff
[ 0.382764] reserve RAM buffer: 00000000bf9b8000 - 00000000bfffffff
[ 0.382767] reserve RAM buffer: 00000000bfac6000 - 00000000bfffffff
[ 0.382770] reserve RAM buffer: 00000000bfe00000 - 00000000bfffffff
[ 0.382871] NetLabel: Initializing
[ 0.382873] NetLabel: domain hash size = 128
[ 0.382875] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.382886] NetLabel: unlabeled traffic allowed by default
[ 0.382938] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.382944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.382949] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.392089] Switching to clocksource hpet
[ 0.399328] AppArmor: AppArmor Filesystem Enabled
[ 0.399367] pnp: PnP ACPI init
[ 0.399388] ACPI: bus type pnp registered
[ 0.419582] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.419585] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.419587] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.419589] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.419591] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.419593] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.419595] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.419597] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.419599] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.419601] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.419603] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.419605] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.419607] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.419609] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.419611] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.419612] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.419614] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.419700] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.419704] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.419707] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.419709] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.419712] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.419714] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.419717] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.419719] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.419722] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.419724] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.419727] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.419729] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.419732] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.419735] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.419738] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.419742] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.419762] pnp 00:01: [bus 00-ff]
[ 0.419764] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.419766] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.419768] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.419770] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.419773] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.419778] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.419780] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.419782] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.419784] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.419786] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.419788] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.419790] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.419793] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.419795] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.419797] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.419799] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.419801] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.419803] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.419877] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.439634] pnp 00:02: [io 0x0010-0x001f]
[ 0.439636] pnp 00:02: [io 0x0090-0x009f]
[ 0.439638] pnp 00:02: [io 0x0024-0x0025]
[ 0.439640] pnp 00:02: [io 0x0028-0x0029]
[ 0.439641] pnp 00:02: [io 0x002c-0x002d]
[ 0.439643] pnp 00:02: [io 0x0030-0x0031]
[ 0.439645] pnp 00:02: [io 0x0034-0x0035]
[ 0.439647] pnp 00:02: [io 0x0038-0x0039]
[ 0.439649] pnp 00:02: [io 0x003c-0x003d]
[ 0.439650] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.439652] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.439654] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.439656] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.439658] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.439659] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.439661] pnp 00:02: [io 0x0050-0x0053]
[ 0.439663] pnp 00:02: [io 0x0072-0x0077]
[ 0.439665] pnp 00:02: [io 0x002e-0x002f]
[ 0.439667] pnp 00:02: [io 0x1000-0x107f]
[ 0.439668] pnp 00:02: [io 0x1180-0x11ff]
[ 0.439670] pnp 00:02: [io 0x0800-0x080f]
[ 0.439672] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.439674] pnp 00:02: [io 0x1600-0x167f]
[ 0.439675] pnp 00:02: [io 0x1680-0x169f]
[ 0.439677] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.439679] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.439681] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.439683] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.439685] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.439690] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.439769] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.439772] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.439775] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.439777] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.439782] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.439785] system 00:02: [io 0x1680-0x169f] has been reserved
[ 0.439788] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.439790] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.439793] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.439795] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.439798] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.439800] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.439804] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.439839] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.439869] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.439878] pnp 00:04: [io 0x0000-0x000f]
[ 0.439880] pnp 00:04: [io 0x0080-0x008f]
[ 0.439882] pnp 00:04: [io 0x00c0-0x00df]
[ 0.439884] pnp 00:04: [dma 4]
[ 0.439909] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.439917] pnp 00:05: [io 0x0061]
[ 0.439945] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.439954] pnp 00:06: [io 0x00f0]
[ 0.439966] pnp 00:06: [irq 13]
[ 0.439995] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440015] pnp 00:07: [io 0x0070-0x0071]
[ 0.440020] pnp 00:07: [irq 8]
[ 0.440047] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440055] pnp 00:08: [io 0x0060]
[ 0.440057] pnp 00:08: [io 0x0064]
[ 0.440062] pnp 00:08: [irq 1]
[ 0.440096] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.440108] pnp 00:09: [irq 12]
[ 0.440141] pnp 00:09: Plug and Play ACPI device, IDs LEN0006 PNP0f13 (active)
[ 0.459919] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.459967] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.460440] pnp: PnP ACPI: found 11 devices
[ 0.460442] ACPI: ACPI bus type pnp unregistered
[ 0.466782] PCI: max bus depth: 2 pci_try_num: 3
[ 0.466865] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.466870] pci 0000:00:1c.5: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.466873] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.466877] pci 0000:00:1c.1: BAR 13: assigned [io 0xa000-0xafff]
[ 0.466880] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
[ 0.466883] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.466887] pci 0000:00:1c.0: BAR 13: assigned [io 0xb000-0xbfff]
[ 0.466890] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref]
[ 0.466894] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.466897] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.466901] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.466904] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.466908] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.466912] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.466917] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff]
[ 0.466922] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.466930] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.466933] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
[ 0.466939] pci 0000:00:1c.1: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.466944] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.466952] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.466955] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.466961] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd7ffffff]
[ 0.466966] pci 0000:00:1c.3: bridge window [mem 0xdbf00000-0xdbffffff 64bit pref]
[ 0.466974] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.466977] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.466983] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.466988] pci 0000:00:1c.4: bridge window [mem 0xdbe00000-0xdbefffff 64bit pref]
[ 0.466996] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.466999] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 0.467005] pci 0000:00:1c.5: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.467010] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.467021] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.467024] pci 0000:15:00.0: BAR 15: assigned [mem 0xdc000000-0xdfffffff pref]
[ 0.467026] pci 0000:15:00.0: BAR 14: assigned [io 0x5000-0x50ff]
[ 0.467028] pci 0000:15:00.0: BAR 13: assigned [io 0x5400-0x54ff]
[ 0.467031] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.467033] pci 0000:15:00.0: bridge window [io 0x5400-0x54ff]
[ 0.467038] pci 0000:15:00.0: bridge window [io 0x5000-0x50ff]
[ 0.467044] pci 0000:15:00.0: bridge window [mem 0xdc000000-0xdfffffff pref]
[ 0.467050] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.467055] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.467058] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
[ 0.467064] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbdfffff]
[ 0.467069] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.467096] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.467100] pci 0000:00:01.0: setting latency timer to 64
[ 0.467111] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.467116] pci 0000:00:1c.0: setting latency timer to 64
[ 0.467126] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.467131] pci 0000:00:1c.1: setting latency timer to 64
[ 0.467141] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.467146] pci 0000:00:1c.3: setting latency timer to 64
[ 0.467153] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.467158] pci 0000:00:1c.4: setting latency timer to 64
[ 0.467168] pci 0000:00:1c.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.467173] pci 0000:00:1c.5: setting latency timer to 64
[ 0.467181] pci 0000:00:1e.0: setting latency timer to 64
[ 0.467190] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.467197] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.467199] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.467201] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.467204] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.467206] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.467208] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.467211] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.467214] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.467217] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.467220] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.467223] pci_bus 0000:02: resource 1 [mem 0xc0400000-0xc05fffff]
[ 0.467226] pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.467229] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.467232] pci_bus 0000:03: resource 1 [mem 0xf8100000-0xf81fffff]
[ 0.467235] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.467239] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.467242] pci_bus 0000:05: resource 1 [mem 0xd6000000-0xd7ffffff]
[ 0.467245] pci_bus 0000:05: resource 2 [mem 0xdbf00000-0xdbffffff 64bit pref]
[ 0.467248] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff]
[ 0.467251] pci_bus 0000:0d: resource 1 [mem 0xd4000000-0xd5ffffff]
[ 0.467254] pci_bus 0000:0d: resource 2 [mem 0xdbe00000-0xdbefffff 64bit pref]
[ 0.467257] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff]
[ 0.467260] pci_bus 0000:04: resource 1 [mem 0xf8200000-0xf82fffff]
[ 0.467263] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.467267] pci_bus 0000:15: resource 0 [io 0x5000-0x8fff]
[ 0.467270] pci_bus 0000:15: resource 1 [mem 0xd8000000-0xdbdfffff]
[ 0.467273] pci_bus 0000:15: resource 2 [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.467276] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.467279] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.467282] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.467285] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.467287] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.467290] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.467293] pci_bus 0000:16: resource 0 [io 0x5400-0x54ff]
[ 0.467295] pci_bus 0000:16: resource 1 [io 0x5000-0x50ff]
[ 0.467297] pci_bus 0000:16: resource 2 [mem 0xdc000000-0xdfffffff pref]
[ 0.467300] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.467343] NET: Registered protocol family 2
[ 0.467582] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.469585] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.473634] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.474151] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.474153] TCP reno registered
[ 0.474170] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.474242] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.474446] NET: Registered protocol family 1
[ 0.474478] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.474481] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.474489] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.474511] pci 0000:00:1a.0: PCI INT A disabled
[ 0.474519] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.474540] pci 0000:00:1a.1: PCI INT B disabled
[ 0.474547] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.474550] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.474554] pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.474573] pci 0000:00:1a.2: PCI INT C disabled
[ 0.474582] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.474587] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.474592] pci 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.474637] pci 0000:00:1a.7: PCI INT D disabled
[ 0.474660] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.474662] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.474667] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.474687] pci 0000:00:1d.0: PCI INT A disabled
[ 0.474706] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.474726] pci 0000:00:1d.1: PCI INT B disabled
[ 0.474738] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.474758] pci 0000:00:1d.2: PCI INT C disabled
[ 0.474767] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.474771] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.474780] pci 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.474802] pci 0000:00:1d.7: PCI INT D disabled
[ 0.474819] pci 0000:01:00.0: Boot video device
[ 0.474842] PCI: CLS 64 bytes, default 64
[ 0.474850] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.474853] Placing 64MB software IO TLB between ffff8800bb8a1000 - ffff8800bf8a1000
[ 0.474855] software IO TLB at phys 0xbb8a1000 - 0xbf8a1000
[ 0.474864] Simple Boot Flag at 0x35 set to 0x1
[ 0.475206] audit: initializing netlink socket (disabled)
[ 0.475216] type=2000 audit(1340775583.468:1): initialized
[ 0.519559] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.567098] VFS: Disk quotas dquot_6.5.2
[ 0.567155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.567675] fuse init (API version 7.17)
[ 0.567764] msgmni has been set to 15797
[ 0.568093] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.568119] io scheduler noop registered
[ 0.568121] io scheduler deadline registered
[ 0.568154] io scheduler cfq registered (default)
[ 0.568274] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.568308] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.568398] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.568451] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.568563] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.568616] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.568727] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.568781] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.568891] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.568944] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.569054] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.569106] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.569232] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.569234] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.569238] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.569258] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.569263] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.569284] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.569286] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.569291] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.569310] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.569315] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.569334] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.569340] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.569360] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.569363] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.569368] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.569388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.569458] pciehp: Using ACPI for slot detection.
[ 0.569491] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3
[ 0.569516] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.569531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.569589] intel_idle: MWAIT substates: 0x3122220
[ 0.569591] intel_idle: does not run on family 6 model 23
[ 0.569746] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.569900] ACPI: AC Adapter [AC] (on-line)
[ 0.569979] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.570103] ACPI: Lid Switch [LID]
[ 0.570148] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.570153] ACPI: Sleep Button [SLPB]
[ 0.570210] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.570213] ACPI: Power Button [PWRF]
[ 0.580151] Monitor-Mwait will be used to enter C-1 state
[ 0.580195] Monitor-Mwait will be used to enter C-2 state
[ 0.585881] Freeing initrd memory: 15080k freed
[ 0.592717] Monitor-Mwait will be used to enter C-3 state
[ 0.592743] Marking TSC unstable due to TSC halts in idle
[ 0.592766] ACPI: acpi_idle registered with cpuidle
[ 0.635564] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.635567] ACPI: Thermal Zone [THM0] (70 C)
[ 0.636487] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.636490] ACPI: Thermal Zone [THM1] (68 C)
[ 0.636514] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.636523] ACPI: Battery Slot [BAT0] (battery present)
[ 0.636556] ERST: Table is not found!
[ 0.636558] GHES: HEST is not enabled!
[ 0.650285] ACPI: Battery Slot [BAT0] (battery present)
[ 0.740354] Linux agpgart interface v0.103
[ 0.742009] brd: module loaded
[ 0.742823] loop: module loaded
[ 0.742955] ahci 0000:00:1f.2: version 3.0
[ 0.742968] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.743025] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.743069] ahci: SSS flag set, parallel bus scan disabled
[ 0.743096] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.743100] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.743105] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.743613] scsi0 : ahci
[ 0.743703] scsi1 : ahci
[ 0.743784] scsi2 : ahci
[ 0.743860] scsi3 : ahci
[ 0.744128] ata1: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504100 irq 46
[ 0.744132] ata2: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504180 irq 46
[ 0.744134] ata3: DUMMY
[ 0.744135] ata4: DUMMY
[ 0.744542] Fixed MDIO Bus: probed
[ 0.744562] tun: Universal TUN/TAP device driver, 1.6
[ 0.744564] tun: (C) 1999-2004 Max Krasnyansky
[ 0.744617] PPP generic driver version 2.4.2
[ 0.744716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.744731] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 0.744736] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 0.744743] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.744759] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.744763] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.744808] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.744842] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.748722] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.748739] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf8504c00
[ 0.764019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.764157] hub 1-0:1.0: USB hub found
[ 0.764162] hub 1-0:1.0: 6 ports detected
[ 0.764241] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.764246] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.764253] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.764267] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.764270] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.764316] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.764347] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.768225] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.768238] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8505000
[ 0.784019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.784132] hub 2-0:1.0: USB hub found
[ 0.784135] hub 2-0:1.0: 6 ports detected
[ 0.784211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.784224] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.784241] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.784244] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.784249] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.784257] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.784260] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.784303] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.784339] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[ 0.784464] hub 3-0:1.0: USB hub found
[ 0.784468] hub 3-0:1.0: 2 ports detected
[ 0.784537] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.784547] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.784550] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.784600] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.784634] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.784767] hub 4-0:1.0: USB hub found
[ 0.784770] hub 4-0:1.0: 2 ports detected
[ 0.784835] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 0.784838] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 0.784843] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.784851] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.784854] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.784904] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.784940] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001840
[ 0.785062] hub 5-0:1.0: USB hub found
[ 0.785066] hub 5-0:1.0: 2 ports detected
[ 0.785131] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.785134] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.785139] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.785147] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.785150] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.785200] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.785234] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860
[ 0.785358] hub 6-0:1.0: USB hub found
[ 0.785362] hub 6-0:1.0: 2 ports detected
[ 0.785429] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.785437] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.785440] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.785484] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.785518] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[ 0.785641] hub 7-0:1.0: USB hub found
[ 0.785645] hub 7-0:1.0: 2 ports detected
[ 0.785711] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.785719] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.785722] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.785764] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.785798] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.785923] hub 8-0:1.0: USB hub found
[ 0.785927] hub 8-0:1.0: 2 ports detected
[ 0.786046] usbcore: registered new interface driver libusual
[ 0.786084] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.794720] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.794726] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.794861] mousedev: PS/2 mouse device common for all mice
[ 0.795054] rtc_cmos 00:07: RTC can wake from S4
[ 0.795173] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.795203] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.795293] device-mapper: uevent: version 1.0.3
[ 0.795369] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.795430] cpuidle: using governor ladder
[ 0.795511] cpuidle: using governor menu
[ 0.795513] EFI Variables Facility v0.08 2004-May-17
[ 0.795750] TCP cubic registered
[ 0.795870] NET: Registered protocol family 10
[ 0.796349] NET: Registered protocol family 17
[ 0.796364] Registering the dns_resolver key type
[ 0.796561] PM: Hibernation image not present or could not be loaded.
[ 0.796573] registered taskstats version 1
[ 0.825646] Magic number: 0:689:669
[ 0.825772] rtc_cmos 00:07: setting system clock to 2012-06-27 05:39:44 UTC (1340775584)
[ 0.827493] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.827496] EDD information not available.
[ 0.837887] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.064074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.065793] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.065796] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.065799] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.067516] ata1.00: ATA-8: WDC WD5000BEVT-00A03T0, 01.01A01, max UDMA/133
[ 1.067521] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.070204] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.070207] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.070210] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.071914] ata1.00: configured for UDMA/133
[ 1.072082] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-0 01.0 PQ: 0 ANSI: 5
[ 1.072214] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.072222] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.072266] sd 0:0:0:0: [sda] Write Protect is off
[ 1.072268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.072296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.107123] sda: sda1 sda2
[ 1.107647] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.192103] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 1.328709] hub 1-5:1.0: USB hub found
[ 1.328784] hub 1-5:1.0: 4 ports detected
[ 1.392182] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.394241] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.394244] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.394247] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.396025] ata2.00: ATA-8: WDC WD5000BEVT-16A0RT0, 01.01A01, max UDMA/133
[ 1.396030] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.398356] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.398360] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.398363] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.400093] ata2.00: configured for UDMA/133
[ 1.400238] scsi 1:0:0:0: Direct-Access ATA WDC WD5000BEVT-1 01.0 PQ: 0 ANSI: 5
[ 1.400393] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.400405] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.400441] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.400443] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.400467] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.433967] sdb: sdb1 sdb2
[ 1.434472] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.436119] Freeing unused kernel memory: 920k freed
[ 1.436377] Write protecting the kernel read-only data: 12288k
[ 1.441646] Freeing unused kernel memory: 1608k freed
[ 1.445942] Freeing unused kernel memory: 1196k freed
[ 1.461893] udevd[97]: starting version 175
[ 1.475485] md: linear personality registered for level -1
[ 1.479985] md: multipath personality registered for level -4
[ 1.485155] md: raid0 personality registered for level 0
[ 1.492575] md: raid1 personality registered for level 1
[ 1.497084] async_tx: api initialized (async)
[ 1.564018] raid6: int64x1 1717 MB/s
[ 1.572031] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 1.608899] tg3.c:v3.121 (November 2, 2011)
[ 1.608915] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.608927] tg3 0000:04:00.0: setting latency timer to 64
[ 1.627767] sdhci: Secure Digital Host Controller Interface driver
[ 1.627770] sdhci: Copyright(c) Pierre Ossman
[ 1.628142] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 1.628160] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.629179] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.629211] mmc0: no vmmc regulator found
[ 1.630247] Registered led device: mmc0::
[ 1.632028] raid6: int64x2 2334 MB/s
[ 1.649778] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 1.700157] raid6: int64x4 1776 MB/s
[ 1.718013] md: bind
[ 1.737932] md: bind
[ 1.739619] bio: create slab at 1
[ 1.739627] md/raid0:md1: md_size is 1952542464 sectors.
[ 1.739630] md: RAID0 configuration for md1 - 1 zone
[ 1.739631] md: zone0=[sda2/sdb2]
[ 1.739635] zone-offset= 0KB, device-offset= 0KB, size= 976271232KB
[ 1.739637]
[ 1.739645] md1: detected capacity change from 0 to 999701741568
[ 1.768025] raid6: int64x8 1526 MB/s
[ 1.774669] md: bind
[ 1.776417] md1: unknown partition table
[ 1.836027] raid6: sse2x1 3732 MB/s
[ 1.863665] md: bind
[ 1.897700] md/raid1:md0: active with 2 out of 2 mirrors
[ 1.897721] md0: detected capacity change from 0 to 254738432
[ 1.904022] raid6: sse2x2 4122 MB/s
[ 1.904869] md0: unknown partition table
[ 1.972029] raid6: sse2x4 6821 MB/s
[ 1.972031] raid6: using algorithm sse2x4 (6821 MB/s)
[ 1.972509] xor: automatically using best checksumming function: generic_sse
[ 1.992022] generic_sse: 8581.000 MB/sec
[ 1.992025] xor: using function: generic_sse (8581.000 MB/sec)
[ 1.993014] md: raid6 personality registered for level 6
[ 1.993016] md: raid5 personality registered for level 5
[ 1.993018] md: raid4 personality registered for level 4
[ 2.001773] md: raid10 personality registered for level 10
[ 2.017777] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:27:13:b5:f6:73
[ 2.017782] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.017785] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.017787] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.044144] usb 1-5.3: new full-speed USB device number 4 using ehci_hcd
[ 2.779590] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 21.812908] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.818731] udevd[426]: starting version 175
[ 22.848641] lp: driver loaded but no devices found
[ 22.874223] Adding 8388604k swap on /dev/mapper/ovecka-swap. Priority:-1 extents:1 across:8388604k
[ 22.905667] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 22.907220] mei 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.907227] mei 0000:00:03.0: setting latency timer to 64
[ 22.907284] mei 0000:00:03.0: irq 47 for MSI/MSI-X
[ 22.908629] cfg80211: Calling CRDA to update world regulatory domain
[ 22.918995] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 22.919000] Disabling lock debugging due to kernel taint
[ 22.938367] acpi device:08: registered as cooling_device2
[ 22.938458] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/LNXVIDEO:01/input/input4
[ 22.939851] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 22.947367] Non-volatile memory driver v1.3
[ 22.951933] wmi: Mapper loaded
[ 22.977984] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 22.977987] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 23.002444] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 23.002447] Copyright(c) 2003-2011 Intel Corporation
[ 23.002494] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 23.002503] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 23.002528] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 23.002530] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005798000
[ 23.002532] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
[ 23.002612] iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
[ 23.002654] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 23.002710] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 23.021802] iwlwifi 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
[ 23.021804] iwlwifi 0000:03:00.0: Device SKU: 0Xf0
[ 23.024107] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 23.025486] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[ 23.063843] [fglrx] Maximum main memory to use for locked dma buffers: 7685 MBytes.
[ 23.064527] [fglrx] vendor: 1002 device: 95c4 count: 1
[ 23.065536] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 23.065565] pci 0000:01:00.0: power state changed by ACPI to D0
[ 23.065569] pci 0000:01:00.0: power state changed by ACPI to D0
[ 23.065578] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.065583] pci 0000:01:00.0: setting latency timer to 64
[ 23.066014] [fglrx] Kernel PAT support is enabled
[ 23.066035] [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors
[ 23.068186] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 23.068189] thinkpad_acpi:
[ 23.068191] thinkpad_acpi: ThinkPad BIOS 7YET79WW (3.09 ), EC 7VHT16WW-1.06
[ 23.068193] thinkpad_acpi: Lenovo ThinkPad R500, model 273232G
[ 23.126307] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 23.126378] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 23.126409] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 23.139742] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 23.140760] thinkpad_acpi: radio switch found; radios are disabled
[ 23.146674] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 23.147755] Registered led device: tpacpi::thinklight
[ 23.147828] Registered led device: tpacpi::power
[ 23.147869] Registered led device: tpacpi::standby
[ 23.147911] Registered led device: tpacpi::thinkvantage
[ 23.150260] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 23.150599] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 23.151619] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 23.159325] r852 0000:15:00.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 23.183786] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 23.186037] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 23.186117] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 23.186182] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 23.186248] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.201050] r852: driver loaded successfully
[ 23.204773] r592 0000:15:00.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 23.205811] r592: driver successfully loaded
[ 23.208756] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 23.221167] input: RAPOO V3 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3:1.0/input/input10
[ 23.221352] generic-usb 0003:1BCF:08DA.0001: input,hidraw0: USB HID v1.00 Keyboard [RAPOO V3] on usb-0000:00:1a.7-5.3/input0
[ 23.223467] input: RAPOO V3 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3:1.1/input/input11
[ 23.223745] generic-usb 0003:1BCF:08DA.0002: input,hidraw1: USB HID v1.00 Mouse [RAPOO V3] on usb-0000:00:1a.7-5.3/input1
[ 23.223783] usbcore: registered new interface driver usbhid
[ 23.223785] usbhid: USB HID core driver
[ 23.250935] EXT4-fs (dm-4): re-mounted. Opts: errors=remount-ro
[ 23.311164] type=1400 audit(1340775606.979:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=632 comm="apparmor_parser"
[ 23.311571] type=1400 audit(1340775606.979:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=632 comm="apparmor_parser"
[ 23.311791] type=1400 audit(1340775606.979:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=632 comm="apparmor_parser"
[ 23.313357] type=1400 audit(1340775606.983:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=671 comm="apparmor_parser"
[ 23.313733] type=1400 audit(1340775606.983:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=671 comm="apparmor_parser"
[ 23.313951] type=1400 audit(1340775606.983:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=671 comm="apparmor_parser"
[ 23.314136] type=1400 audit(1340775606.983:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=706 comm="apparmor_parser"
[ 23.317160] type=1400 audit(1340775606.987:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=707 comm="apparmor_parser"
[ 23.340923] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 23.340928] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 23.340935] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x5000-0x8fff]
[ 23.340938] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbdfffff]
[ 23.340941] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbdfffff: excluding 0xdba20000-0xdbdfffff
[ 23.340953] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xdc000000-0xdfffffff 64bit pref]
[ 23.340956] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdc000000-0xdfffffff: excluding 0xdc000000-0xdfffffff
[ 23.397794] cfg80211: World regulatory domain updated:
[ 23.397797] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.397800] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.397802] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.397805] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.397807] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.397809] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.604988] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 23.605214] Registered led device: phy0-led
[ 23.605242] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 23.609195] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 23.701970] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 23.719286] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
[ 23.898639] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 23.898667] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 23.898690] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 24.704479] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 25.041511] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 25.119764] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 25.119767] vesafb: scrolling: redraw
[ 25.119770] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 25.123794] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90005b80000, using 5824k, total 5824k
[ 25.124034] Console: switching to colour frame buffer device 175x65
[ 25.124063] fb0: VESA VGA frame buffer device
[ 28.262690] init: failsafe main process (1050) killed by TERM signal
[ 28.603135] Bluetooth: Core ver 2.16
[ 28.603164] NET: Registered protocol family 31
[ 28.603166] Bluetooth: HCI device and connection manager initialized
[ 28.603169] Bluetooth: HCI socket layer initialized
[ 28.603171] Bluetooth: L2CAP socket layer initialized
[ 28.603397] Bluetooth: SCO socket layer initialized
[ 28.622001] Bluetooth: RFCOMM TTY layer initialized
[ 28.622005] Bluetooth: RFCOMM socket layer initialized
[ 28.622007] Bluetooth: RFCOMM ver 1.11
[ 28.624540] ppdev: user-space parallel port driver
[ 28.637275] type=1400 audit(1340775612.307:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1137 comm="apparmor_parser"
[ 28.637749] type=1400 audit(1340775612.307:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1137 comm="apparmor_parser"
[ 28.708171] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.708174] Bluetooth: BNEP filters: protocol multicast
[ 28.717849] type=1400 audit(1340775612.387:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1177 comm="apparmor_parser"
[ 28.718241] type=1400 audit(1340775612.387:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1177 comm="apparmor_parser"
[ 28.718463] type=1400 audit(1340775612.387:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1177 comm="apparmor_parser"
[ 28.728957] type=1400 audit(1340775612.399:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1176 comm="apparmor_parser"
[ 28.732515] type=1400 audit(1340775612.403:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1179 comm="apparmor_parser"
[ 28.738828] type=1400 audit(1340775612.407:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1181 comm="apparmor_parser"
[ 28.739737] type=1400 audit(1340775612.407:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1179 comm="apparmor_parser"
[ 28.740797] type=1400 audit(1340775612.411:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1179 comm="apparmor_parser"
[ 28.748440] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.750486] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 28.779702] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.780869] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.968697] init: mongodb main process (1272) terminated with status 2
[ 29.293853] fglrx_pci 0000:01:00.0: irq 51 for MSI/MSI-X
[ 29.294566] [fglrx] Firegl kernel thread PID: 1419
[ 29.294668] [fglrx] Firegl kernel thread PID: 1420
[ 29.294777] [fglrx] Firegl kernel thread PID: 1421
[ 29.294909] [fglrx] IRQ 51 Enabled
[ 29.445062] vboxdrv: Found 2 processor cores.
[ 29.445271] vboxdrv: fAsync=0 offMin=0x190 offMax=0x789
[ 29.445335] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 29.445337] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 29.456253] vboxpci: IOMMU not found (not registered)
[ 29.982052] [fglrx] Gart USWC size:1279 M.
[ 29.982055] [fglrx] Gart cacheable size:508 M.
[ 29.982060] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 29.982062] [fglrx] Reserved FB block: Unshared offset:7bfa000, size:401000
[ 29.982064] [fglrx] Reserved FB block: Unshared offset:7ffb000, size:5000
[ 31.501239] tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 31.501243] tg3 0000:04:00.0: eth0: Flow control is off for TX and off for RX
[ 31.502000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.083704] Linux video capture interface: v2.00
[ 38.084959] v4l2loopack driver version 1.0.2 loaded
[ 38.303628] init: plymouth-stop pre-start process (2633) terminated with status 1
[ 54.128021] tap0: no IPv6 routers present
[ 57.032022] tap1: no IPv6 routers present
[ 201.780062] CE: hpet increased min_delta_ns to 20113 nsec
[ 1197.716120] usb 1-5.1: new high-speed USB device number 5 using ehci_hcd
[ 1197.817535] Initializing USB Mass Storage driver...
[ 1197.819165] scsi4 : usb-storage 1-5.1:1.0
[ 1197.819963] usbcore: registered new interface driver usb-storage
[ 1197.819967] USB Mass Storage support registered.
[ 1198.816864] scsi 4:0:0:0: Direct-Access Samsung File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 1198.817347] scsi 4:0:0:1: Direct-Access Samsung File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 1198.818079] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1198.818429] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 1198.824941] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 1198.825563] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 1200.079299] usb 1-5.1: USB disconnect, device number 5
[ 1205.652250] usb 1-5.1: new high-speed USB device number 6 using ehci_hcd
[ 1205.750363] scsi5 : usb-storage 1-5.1:1.0
[ 1206.749244] scsi 5:0:0:0: Direct-Access Samsung File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 1206.749737] scsi 5:0:0:1: Direct-Access Samsung File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 1206.750452] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1206.750732] sd 5:0:0:1: Attached scsi generic sg3 type 0
[ 1206.759086] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 1206.760598] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[ 7193.635999] usb 1-5.1: USB disconnect, device number 6
[ 9072.126672] tg3 0000:04:00.0: PME# enabled
[ 9072.126687] pcieport 0000:00:1c.5: wake-up capability enabled by ACPI
[ 9074.264289] PM: Syncing filesystems ... done.
[ 9074.282220] PM: Preparing system for mem sleep
[ 9075.780221] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9075.796131] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9075.812121] PM: Entering mem sleep
[ 9075.812214] Suspending console(s) (use no_console_suspend to debug)
[ 9075.813120] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 9075.813209] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9075.813313] sd 1:0:0:0: [sdb] Stopping disk
[ 9075.813482] sd 0:0:0:0: [sda] Stopping disk
[ 9075.882340] sdhci-pci 0000:15:00.2: PCI INT C disabled
[ 9075.882417] [fglrx] IRQ 51 Disabled
[ 9075.882415] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 9075.882426] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 9075.882436] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 9075.882448] [fglrx] Preparing suspend fglrx in kernel.
[ 9075.882448] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 9075.882483] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[ 9075.882857] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 9075.882869] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 9075.882880] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 9075.882891] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 9075.984391] snd_hda_intel 0000:00:1b.0: PCI INT B disabled
[ 9076.000057] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.542 msecs
[ 9076.121115] [fglrx] Suspending fglrx in kernel completed.
[ 9076.121118] [fglrx] Power down the ASIC .
[ 9076.121161] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 238.792 msecs
[ 9076.121213] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 238.291 msecs
[ 9076.391740] PM: suspend of drv:sd dev:0:0:0:0 complete after 578.532 msecs
[ 9076.391774] PM: suspend of drv:scsi dev:target0:0:0 complete after 578.534 msecs
[ 9076.391805] PM: suspend of drv:scsi dev:host0 complete after 547.976 msecs
[ 9076.503306] PM: suspend of drv:sd dev:1:0:0:0 complete after 690.191 msecs
[ 9076.503338] PM: suspend of drv:scsi dev:target1:0:0 complete after 690.179 msecs
[ 9076.503367] PM: suspend of drv:scsi dev:host1 complete after 659.562 msecs
[ 9076.516104] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 633.709 msecs
[ 9076.516133] PM: suspend of drv: dev:pci0000:00 complete after 633.204 msecs
[ 9076.516140] PM: suspend of devices complete after 703.610 msecs
[ 9076.516144] PM: suspend devices took 0.704 seconds
[ 9076.564311] ehci_hcd 0000:00:1d.7: PME# enabled
[ 9076.564319] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 9076.580122] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 9076.580267] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 9076.580271] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
[ 9076.580328] ehci_hcd 0000:00:1a.7: PME# enabled
[ 9076.580332] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[ 9076.596104] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 9076.596168] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[ 9076.596173] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D2
[ 9076.596263] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 9076.596267] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D2
[ 9076.612314] PM: late suspend of devices complete after 96.166 msecs
[ 9076.612655] ACPI: Preparing to enter system sleep state S3
[ 9076.812160] PM: Saving platform NVS memory
[ 9076.815218] Disabling non-boot CPUs ...
[ 9076.816795] CPU 1 is now offline
[ 9076.817342] Extended CMOS year: 2000
[ 9076.817342] ACPI: Low-level resume complete
[ 9076.817342] PM: Restoring platform NVS memory
[ 9076.817342] Extended CMOS year: 2000
[ 9076.817342] Enabling non-boot CPUs ...
[ 9076.817342] Booting Node 0 Processor 1 APIC 0x1
[ 9076.817342] smpboot cpu 1: start_ip = 99000
[ 9076.816771] Calibrating delay loop (skipped) already calibrated this CPU
[ 9076.816771] Disabled fast string operations
[ 9076.831632] NMI watchdog enabled, takes one hw-pmu counter.
[ 9076.893126] CPU1 is up
[ 9076.895449] ACPI: Waking up from system sleep state S3
[ 9077.142476] ACPI: \_SB_.GDCK - undocking
[ 9077.284328] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9077.284351] mei 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9077.284375] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 9077.284377] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 9077.284404] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 9077.284430] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 9077.284433] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 9077.284436] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 9077.284465] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 9077.284479] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 9077.284482] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 9077.284509] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 9077.284532] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[ 9077.284535] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 9077.284538] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 9077.284574] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 9077.284593] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[ 9077.284599] ehci_hcd 0000:00:1a.7: PME# disabled
[ 9077.284601] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 9077.284605] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 9077.284644] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 9077.284682] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc071c061)
[ 9077.284687] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc050c040)
[ 9077.284692] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0xb0b0)
[ 9077.284703] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9077.284759] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021)
[ 9077.284765] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0xa0a0)
[ 9077.284776] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9077.284842] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9077.284907] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9077.284962] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001)
[ 9077.284969] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0, writing 0x9090)
[ 9077.284979] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9077.285015] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 9077.285018] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 9077.285045] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 9077.285068] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 9077.285071] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 9077.285073] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 9077.285103] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 9077.285141] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 9077.285185] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 9077.285203] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 9077.285209] ehci_hcd 0000:00:1d.7: PME# disabled
[ 9077.285211] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 9077.285215] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 9077.285335] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 9077.285422] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100403)
[ 9077.300123] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xdbdfec00-0xdbdfecff] (PCI address [0xdbdfec00-0xdbdfecff])
[ 9077.300163] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[ 9077.300172] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 9077.316123] r592 0000:15:00.4: BAR 0: set to [mem 0xdbdfe400-0xdbdfe4ff] (PCI address [0xdbdfe400-0xdbdfe4ff])
[ 9077.316162] r592 0000:15:00.4: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[ 9077.316170] r592 0000:15:00.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 9077.332121] r852 0000:15:00.5: BAR 0: set to [mem 0xdbdfe000-0xdbdfe0ff] (PCI address [0xdbdfe000-0xdbdfe0ff])
[ 9077.332160] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[ 9077.332169] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 9077.332885] PM: early resume of devices complete after 48.754 msecs
[ 9077.333023] mei 0000:00:03.0: irq 47 for MSI/MSI-X
[ 9077.333043] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 9077.333045] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 9077.333052] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 9077.333054] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 9077.333059] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 9077.333063] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 9077.333092] usb usb3: root hub lost power or was reset
[ 9077.333093] usb usb4: root hub lost power or was reset
[ 9077.333106] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 9077.333109] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 9077.333110] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 9077.333114] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 9077.333115] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 9077.333122] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 9077.333123] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 9077.333132] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 9077.333148] usb usb5: root hub lost power or was reset
[ 9077.333152] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9077.333161] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9077.333201] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[ 9077.333228] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 9077.333234] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 9077.333236] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 9077.333240] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9077.333250] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9077.333276] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9077.333279] usb usb6: root hub lost power or was reset
[ 9077.333284] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9077.333294] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9077.333300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9077.333314] usb usb7: root hub lost power or was reset
[ 9077.333331] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 9077.333334] usb usb8: root hub lost power or was reset
[ 9077.333335] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 9077.333343] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 9077.333353] pci 0000:00:1e.0: setting latency timer to 64
[ 9077.333353] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 9077.333370] ahci 0000:00:1f.2: setting latency timer to 64
[ 9077.333436] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[ 9077.333442] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[ 9077.333463] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9077.333466] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 9077.333497] pcieport 0000:00:1c.5: wake-up capability disabled by ACPI
[ 9077.333503] tg3 0000:04:00.0: PME# disabled
[ 9077.333602] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[ 9077.333608] fglrx_pci 0000:01:00.0: setting latency timer to 64
[ 9077.335275] sd 0:0:0:0: [sda] Starting disk
[ 9077.335446] sd 1:0:0:0: [sdb] Starting disk
[ 9077.338181] [fglrx] Power up the ASIC
[ 9077.338198] [fglrx] Preparing resume fglrx in kernel.
[ 9077.349427] legacy_resume(): pnp_bus_resume+0x0/0x70 returns -19
[ 9077.349432] PM: Device 00:0a failed to resume: error -19
[ 9077.371083] [fglrx] Resuming fglrx in kernel completed.
[ 9077.371187] [fglrx] IRQ 51 Enabled
[ 9077.452138] PM: resume of drv: dev:ep_00 complete after 117.433 msecs
[ 9077.452147] PM: resume of drv:hub dev:3-0:1.0 complete after 117.451 msecs
[ 9077.452188] PM: resume of drv: dev:ep_81 complete after 117.484 msecs
[ 9077.452192] PM: resume of drv:hub dev:5-0:1.0 complete after 117.355 msecs
[ 9077.452202] PM: resume of drv:hub dev:8-0:1.0 complete after 116.985 msecs
[ 9077.452207] PM: resume of drv: dev:ep_00 complete after 117.266 msecs
[ 9077.452210] PM: resume of drv: dev:ep_00 complete after 116.952 msecs
[ 9077.452213] PM: resume of drv:hub dev:6-0:1.0 complete after 117.236 msecs
[ 9077.452216] PM: resume of drv: dev:ep_81 complete after 116.991 msecs
[ 9077.452220] PM: resume of drv: dev:ep_00 complete after 117.163 msecs
[ 9077.452227] PM: resume of drv: dev:ep_81 complete after 117.190 msecs
[ 9077.452230] PM: resume of drv:hub dev:7-0:1.0 complete after 117.132 msecs
[ 9077.452234] PM: resume of drv: dev:ep_81 complete after 117.311 msecs
[ 9077.452237] PM: resume of drv: dev:ep_81 complete after 117.084 msecs
[ 9077.452240] PM: resume of drv: dev:ep_00 complete after 117.068 msecs
[ 9077.556074] PM: resume of drv: dev:ep_00 complete after 221.283 msecs
[ 9077.556084] PM: resume of drv:hub dev:4-0:1.0 complete after 221.369 msecs
[ 9077.556311] PM: resume of drv: dev:ep_81 complete after 221.540 msecs
[ 9077.584075] PM: resume of drv: dev:ep_00 complete after 249.537 msecs
[ 9077.584079] PM: resume of drv:hub dev:1-0:1.0 complete after 249.593 msecs
[ 9077.584089] PM: resume of drv: dev:ep_81 complete after 249.571 msecs
[ 9077.584104] PM: resume of drv: dev:ep_00 complete after 248.673 msecs
[ 9077.584111] PM: resume of drv:hub dev:1-5:1.0 complete after 248.714 msecs
[ 9077.584122] PM: resume of drv: dev:ep_81 complete after 248.708 msecs
[ 9077.584137] PM: resume of drv:usbhid dev:1-5.3:1.1 complete after 248.458 msecs
[ 9077.584143] PM: resume of drv:usbhid dev:1-5.3:1.0 complete after 248.526 msecs
[ 9077.584150] PM: resume of drv: dev:ep_00 complete after 248.438 msecs
[ 9077.584163] PM: resume of drv: dev:ep_81 complete after 248.502 msecs
[ 9077.584168] PM: resume of drv: dev:ep_82 complete after 248.470 msecs
[ 9077.652065] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9077.654197] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9077.654200] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9077.654203] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9077.656077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9077.658675] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9077.658679] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9077.658683] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9077.695557] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9077.695560] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9077.695563] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9077.696108] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[ 9077.698230] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9077.698234] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9077.698239] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9077.698855] ata2.00: configured for UDMA/133
[ 9077.701857] ata1.00: configured for UDMA/133
[ 9077.718548] PM: resume of drv:sd dev:1:0:0:0 complete after 383.095 msecs
[ 9077.718575] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 383.094 msecs
[ 9077.735167] PM: resume of drv:sd dev:0:0:0:0 complete after 399.886 msecs
[ 9077.735199] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 382.554 msecs
[ 9077.735995] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 400.632 msecs
[ 9077.844756] PM: resume of drv: dev:ep_00 complete after 509.174 msecs
[ 9077.844764] PM: resume of drv:usb dev:4-1:1.0 complete after 509.231 msecs
[ 9077.844774] PM: resume of drv: dev:ep_02 complete after 509.208 msecs
[ 9077.844794] PM: resume of drv: dev:ep_81 complete after 509.244 msecs
[ 9077.876145] PM: resume of devices complete after 543.204 msecs
[ 9077.876401] PM: resume devices took 0.544 seconds
[ 9077.876441] PM: Finishing wakeup.
[ 9077.876442] Restarting tasks ...
[ 9077.876512] usb 1-5: USB disconnect, device number 3
[ 9077.876515] usb 1-5.3: USB disconnect, device number 4
[ 9077.887725] done.
[ 9077.887867] video LNXVIDEO:01: Restoring backlight state
[ 9078.579307] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 9078.610503] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9091.276890] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[ 9091.285854] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 9091.288851] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 9091.408882] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 9091.411819] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 9091.459474] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9092.072156] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[ 9092.279450] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9092.284192] usbcore: registered new interface driver btusb
[ 9099.093536] wlan0: authenticate with 80:b6:86:32:7f:6c (try 1)
[ 9099.096073] wlan0: authenticated
[ 9099.100545] wlan0: associate with 80:b6:86:32:7f:6c (try 1)
[ 9099.106506] wlan0: RX AssocResp from 80:b6:86:32:7f:6c (capab=0x411 status=0 aid=3)
[ 9099.106511] wlan0: associated
[ 9099.113567] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9099.113639] cfg80211: Calling CRDA for country: CA
[ 9099.117671] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117675] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117678] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117680] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117682] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117685] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117687] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117690] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117692] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117694] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117696] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117699] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117701] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117704] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117706] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117708] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117710] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117713] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117715] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117717] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117719] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117722] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117724] cfg80211: Disabling freq 2467 MHz
[ 9099.117725] cfg80211: Disabling freq 2472 MHz
[ 9099.117727] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117730] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9099.117732] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117735] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9099.117737] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117739] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9099.117742] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117744] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9099.117746] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117749] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117751] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117753] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117755] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117758] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117760] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117762] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117765] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117767] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117769] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117772] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117774] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117776] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117778] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117781] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117783] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117785] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117787] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117790] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117792] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117795] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117797] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117799] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117801] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117804] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117806] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117809] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117810] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117813] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117815] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117818] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9099.117820] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117822] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9099.117824] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117827] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9099.117829] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117831] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9099.117833] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 9099.117836] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9099.117840] cfg80211: Regulatory domain changed to country: CA
[ 9099.117842] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9099.117844] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9099.117847] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9099.117849] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117851] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9099.117854] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9101.517845] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 80:b6:86:32:7f:6c tid = 0
[ 9110.704021] wlan0: no IPv6 routers present
[ 9119.688104] tap0: no IPv6 routers present
[ 9122.128040] tap1: no IPv6 routers present
[10379.005881] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 80:b6:86:32:7f:6c tid = 6
[10893.477686] wlan0: deauthenticating from 80:b6:86:32:7f:6c by local choice (reason=3)
[10893.516893] cfg80211: All devices are disconnected, going to restore regulatory settings
[10893.516906] cfg80211: Restoring regulatory settings
[10893.516916] cfg80211: Calling CRDA to update world regulatory domain
[10893.521427] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[10893.521430] cfg80211: World regulatory domain updated:
[10893.521432] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10893.521435] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10893.521437] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10893.521440] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10893.521442] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10893.521445] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10893.572319] tg3 0000:04:00.0: PME# enabled
[10893.572335] pcieport 0000:00:1c.5: wake-up capability enabled by ACPI
[10895.108435] PM: Syncing filesystems ... done.
[10895.125385] PM: Preparing system for mem sleep
[10895.591936] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10895.608150] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10895.624139] PM: Entering mem sleep
[10895.624214] Suspending console(s) (use no_console_suspend to debug)
[10895.625071] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[10895.625143] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10895.625290] sd 1:0:0:0: [sdb] Stopping disk
[10895.625312] sd 0:0:0:0: [sda] Stopping disk
[10895.672623] [fglrx] IRQ 51 Disabled
[10895.672654] [fglrx] Preparing suspend fglrx in kernel.
[10895.674262] sdhci-pci 0000:15:00.2: PCI INT C disabled
[10895.674429] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[10895.674886] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[10895.676148] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[10895.676168] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[10895.676188] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[10895.688106] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[10895.688170] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[10895.688223] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[10895.704047] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[10895.776401] snd_hda_intel 0000:00:1b.0: PCI INT B disabled
[10895.792046] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.575 msecs
[10895.911724] PM: suspend of drv:mei dev:0000:00:03.0 complete after 236.797 msecs
[10895.913291] [fglrx] Suspending fglrx in kernel completed.
[10895.913295] [fglrx] Power down the ASIC .
[10895.913337] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 240.759 msecs
[10895.913387] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 238.402 msecs
[10896.204703] PM: suspend of drv:sd dev:0:0:0:0 complete after 579.561 msecs
[10896.204737] PM: suspend of drv:scsi dev:target0:0:0 complete after 579.564 msecs
[10896.204769] PM: suspend of drv:scsi dev:host0 complete after 566.450 msecs
[10896.306746] PM: suspend of drv:sd dev:1:0:0:0 complete after 681.682 msecs
[10896.306776] PM: suspend of drv:scsi dev:target1:0:0 complete after 681.654 msecs
[10896.306805] PM: suspend of drv:scsi dev:host1 complete after 668.512 msecs
[10896.320122] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 645.840 msecs
[10896.320138] PM: suspend of drv: dev:pci0000:00 complete after 645.127 msecs
[10896.320163] PM: suspend of devices complete after 695.625 msecs
[10896.320166] PM: suspend devices took 0.696 seconds
[10896.368335] ehci_hcd 0000:00:1d.7: PME# enabled
[10896.368342] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[10896.384119] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[10896.384266] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[10896.384270] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
[10896.384533] ehci_hcd 0000:00:1a.7: PME# enabled
[10896.384536] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[10896.400119] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[10896.400185] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[10896.400190] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D2
[10896.400278] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[10896.400282] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D2
[10896.416332] PM: late suspend of devices complete after 96.161 msecs
[10896.416673] ACPI: Preparing to enter system sleep state S3
[10896.576177] PM: Saving platform NVS memory
[10896.579235] Disabling non-boot CPUs ...
[10896.579732] Broke affinity for irq 48
[10896.580757] CPU 1 is now offline
[10896.581251] Extended CMOS year: 2000
[10896.581251] ACPI: Low-level resume complete
[10896.581251] PM: Restoring platform NVS memory
[10896.581251] Extended CMOS year: 2000
[10896.581251] Enabling non-boot CPUs ...
[10896.581251] Booting Node 0 Processor 1 APIC 0x1
[10896.581251] smpboot cpu 1: start_ip = 99000
[10896.580737] Calibrating delay loop (skipped) already calibrated this CPU
[10896.580737] Disabled fast string operations
[10896.595202] NMI watchdog enabled, takes one hw-pmu counter.
[10896.657120] CPU1 is up
[10896.659447] ACPI: Waking up from system sleep state S3
[10897.028331] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0x2020, writing 0x20002020)
[10897.028337] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[10897.028360] mei 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[10897.028383] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10897.028386] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10897.028413] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[10897.028440] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[10897.028442] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10897.028445] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10897.028475] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[10897.028488] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[10897.028490] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[10897.028518] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[10897.028541] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[10897.028544] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[10897.028546] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[10897.028583] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[10897.028601] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[10897.028607] ehci_hcd 0000:00:1a.7: PME# disabled
[10897.028609] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[10897.028613] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[10897.028652] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[10897.028691] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc071c061)
[10897.028696] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc050c040)
[10897.028700] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0xb0b0)
[10897.028712] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[10897.028767] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021)
[10897.028773] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0xa0a0)
[10897.028784] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[10897.028851] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[10897.028917] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[10897.028973] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001)
[10897.028979] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0, writing 0x9090)
[10897.028990] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[10897.029027] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10897.029029] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10897.029056] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[10897.029079] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[10897.029082] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10897.029084] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10897.029114] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[10897.029152] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[10897.029197] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[10897.029215] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[10897.029220] ehci_hcd 0000:00:1d.7: PME# disabled
[10897.029223] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[10897.029227] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[10897.029346] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[10897.029433] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100403)
[10897.029530] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[10897.029667] tg3 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x8f2e0000)
[10897.044126] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xdbdfec00-0xdbdfecff] (PCI address [0xdbdfec00-0xdbdfecff])
[10897.044164] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[10897.044173] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[10897.060122] r592 0000:15:00.4: BAR 0: set to [mem 0xdbdfe400-0xdbdfe4ff] (PCI address [0xdbdfe400-0xdbdfe4ff])
[10897.060161] r592 0000:15:00.4: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[10897.060169] r592 0000:15:00.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[10897.076124] r852 0000:15:00.5: BAR 0: set to [mem 0xdbdfe000-0xdbdfe0ff] (PCI address [0xdbdfe000-0xdbdfe0ff])
[10897.076163] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[10897.076172] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[10897.076881] PM: early resume of devices complete after 48.748 msecs
[10897.077007] mei 0000:00:03.0: irq 47 for MSI/MSI-X
[10897.077030] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10897.077033] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10897.077039] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[10897.077044] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[10897.077046] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[10897.077053] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[10897.077079] usb usb3: root hub lost power or was reset
[10897.077083] usb usb4: root hub lost power or was reset
[10897.077094] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[10897.077097] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[10897.077101] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[10897.077101] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[10897.077105] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[10897.077109] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[10897.077113] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[10897.077122] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[10897.077136] usb usb5: root hub lost power or was reset
[10897.077145] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[10897.077153] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[10897.077187] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[10897.077226] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10897.077229] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10897.077233] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[10897.077239] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[10897.077253] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[10897.077272] usb usb6: root hub lost power or was reset
[10897.077287] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[10897.077293] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[10897.077311] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[10897.077321] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[10897.077325] usb usb7: root hub lost power or was reset
[10897.077340] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[10897.077347] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[10897.077353] usb usb8: root hub lost power or was reset
[10897.077354] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[10897.077363] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[10897.077372] pci 0000:00:1e.0: setting latency timer to 64
[10897.077391] ahci 0000:00:1f.2: setting latency timer to 64
[10897.077450] pcieport 0000:00:1c.5: wake-up capability disabled by ACPI
[10897.077450] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[10897.077454] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[10897.077457] tg3 0000:04:00.0: PME# disabled
[10897.077462] fglrx_pci 0000:01:00.0: setting latency timer to 64
[10897.077474] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[10897.077477] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[10897.079637] sd 0:0:0:0: [sda] Starting disk
[10897.079907] sd 1:0:0:0: [sdb] Starting disk
[10897.081768] [fglrx] Power up the ASIC
[10897.081784] [fglrx] Preparing resume fglrx in kernel.
[10897.094593] legacy_resume(): pnp_bus_resume+0x0/0x70 returns -19
[10897.094598] PM: Device 00:0a failed to resume: error -19
[10897.098275] Extended CMOS year: 2000
[10897.114825] [fglrx] Resuming fglrx in kernel completed.
[10897.114930] [fglrx] IRQ 51 Enabled
[10897.196115] PM: resume of drv: dev:ep_00 complete after 117.197 msecs
[10897.196124] PM: resume of drv:hub dev:3-0:1.0 complete after 117.215 msecs
[10897.196161] PM: resume of drv: dev:ep_81 complete after 117.248 msecs
[10897.196167] PM: resume of drv:hub dev:5-0:1.0 complete after 117.185 msecs
[10897.196171] PM: resume of drv:hub dev:8-0:1.0 complete after 116.834 msecs
[10897.196177] PM: resume of drv: dev:ep_00 complete after 117.194 msecs
[10897.196187] PM: resume of drv: dev:ep_00 complete after 116.716 msecs
[10897.196190] PM: resume of drv:hub dev:6-0:1.0 complete after 117.196 msecs
[10897.196198] PM: resume of drv: dev:ep_81 complete after 116.745 msecs
[10897.196202] PM: resume of drv: dev:ep_00 complete after 117.202 msecs
[10897.196209] PM: resume of drv:hub dev:7-0:1.0 complete after 117.104 msecs
[10897.196213] PM: resume of drv: dev:ep_81 complete after 117.213 msecs
[10897.196218] PM: resume of drv: dev:ep_81 complete after 117.067 msecs
[10897.196221] PM: resume of drv: dev:ep_81 complete after 117.239 msecs
[10897.196226] PM: resume of drv: dev:ep_00 complete after 117.027 msecs
[10897.300087] PM: resume of drv:hub dev:4-0:1.0 complete after 221.158 msecs
[10897.300110] PM: resume of drv: dev:ep_00 complete after 221.173 msecs
[10897.300123] PM: resume of drv: dev:ep_81 complete after 221.191 msecs
[10897.328078] PM: resume of drv:hub dev:1-0:1.0 complete after 249.489 msecs
[10897.328089] PM: resume of drv: dev:ep_81 complete after 249.450 msecs
[10897.328102] PM: resume of drv: dev:ep_00 complete after 249.444 msecs
[10897.396082] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10897.396114] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10897.398246] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10897.398249] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10897.398252] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10897.398328] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10897.398331] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10897.398334] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10897.433066] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10897.433069] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10897.433072] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10897.436566] ata1.00: configured for UDMA/133
[10897.437447] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10897.437451] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10897.437455] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10897.439990] ata2.00: configured for UDMA/133
[10897.440047] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[10897.458770] PM: resume of drv:sd dev:0:0:0:0 complete after 379.159 msecs
[10897.458783] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 360.476 msecs
[10897.458803] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 379.011 msecs
[10897.460247] PM: resume of drv:sd dev:1:0:0:0 complete after 380.334 msecs
[10897.460278] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 380.285 msecs
[10897.588958] PM: resume of drv: dev:ep_00 complete after 508.616 msecs
[10897.588974] PM: resume of drv:usb dev:4-1:1.0 complete after 508.796 msecs
[10897.589004] PM: resume of drv: dev:ep_02 complete after 508.732 msecs
[10897.589011] PM: resume of drv: dev:ep_81 complete after 508.756 msecs
[10897.688073] usb 4-2: reset full-speed USB device number 3 using uhci_hcd
[10897.834940] btusb 4-2:1.0: no reset_resume for driver btusb?
[10897.834943] btusb 4-2:1.1: no reset_resume for driver btusb?
[10898.084243] PM: resume of drv:usb dev:4-2:1.2 complete after 1003.704 msecs
[10898.084247] PM: resume of drv:usb dev:4-2:1.0 complete after 1003.820 msecs
[10898.084255] PM: resume of drv: dev:ep_84 complete after 1003.701 msecs
[10898.084258] PM: resume of drv:usb dev:4-2:1.1 complete after 1003.769 msecs
[10898.084262] PM: resume of drv: dev:ep_04 complete after 1003.692 msecs
[10898.084266] PM: resume of drv:usb dev:4-2:1.3 complete after 1003.679 msecs
[10898.084268] PM: resume of drv:bluetooth dev:hci0 complete after 484.106 msecs
[10898.084272] PM: resume of drv: dev:ep_00 complete after 1003.670 msecs
[10898.084277] PM: resume of drv: dev:ep_81 complete after 1003.837 msecs
[10898.084288] PM: resume of drv: dev:ep_03 complete after 1003.765 msecs
[10898.084292] PM: resume of drv: dev:ep_82 complete after 1003.832 msecs
[10898.084295] PM: resume of drv: dev:ep_83 complete after 1003.790 msecs
[10898.084298] PM: resume of drv: dev:ep_02 complete after 1003.824 msecs
[10898.084308] PM: resume of devices complete after 1007.363 msecs
[10898.084761] PM: resume devices took 1.008 seconds
[10898.084805] PM: Finishing wakeup.
[10898.084806] Restarting tasks ... done.
[10898.129900] video LNXVIDEO:01: Restoring backlight state
[10899.596837] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[10899.599768] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[10899.647427] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10899.649902] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[10899.679015] ADDRCONF(NETDEV_UP): eth0: link is not ready
[10906.759241] wlan0: authenticate with 80:b6:86:32:7f:6c (try 1)
[10906.761585] wlan0: authenticated
[10906.762759] wlan0: associate with 80:b6:86:32:7f:6c (try 1)
[10906.768846] wlan0: RX AssocResp from 80:b6:86:32:7f:6c (capab=0x411 status=0 aid=2)
[10906.768855] wlan0: associated
[10906.781148] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[10906.781297] cfg80211: Calling CRDA for country: CA
[10906.791560] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[10906.791571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791578] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[10906.791593] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791599] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[10906.791606] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791612] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[10906.791619] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791625] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[10906.791632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791638] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[10906.791645] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791651] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[10906.791658] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791664] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[10906.791672] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791677] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[10906.791685] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791690] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[10906.791698] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791703] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[10906.791711] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.791716] cfg80211: Disabling freq 2467 MHz
[10906.791720] cfg80211: Disabling freq 2472 MHz
[10906.791726] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[10906.791733] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10906.791799] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[10906.791806] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10906.791812] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[10906.791820] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10906.791825] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[10906.791833] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10906.791839] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[10906.791846] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791852] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[10906.791860] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791865] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[10906.791873] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791878] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[10906.791885] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791892] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[10906.791899] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791905] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[10906.791913] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791919] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[10906.791926] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791932] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[10906.791939] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791945] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[10906.791951] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791957] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule:
[10906.791964] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791970] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule:
[10906.791977] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.791983] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule:
[10906.791990] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.792037] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[10906.792045] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.792051] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[10906.792058] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.792064] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[10906.792074] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.792081] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[10906.792090] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10906.792098] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[10906.792106] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10906.792114] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[10906.792123] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10906.792130] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[10906.792140] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10906.792147] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[10906.792156] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10906.792170] cfg80211: Regulatory domain changed to country: CA
[10906.792176] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10906.792185] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10906.792194] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10906.792203] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.792211] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10906.792218] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10908.772244] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 80:b6:86:32:7f:6c tid = 0
[10918.064027] wlan0: no IPv6 routers present
[10928.880016] tap0: no IPv6 routers present
[10932.208048] tap1: no IPv6 routers present
[12096.241656] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 80:b6:86:32:7f:6c tid = 6
[15306.986470] Monitor-Mwait will be used to enter C-3 state
[15307.047565] thinkpad_acpi: EC reports that Thermal Table has changed
[15353.213777] thinkpad_acpi: EC reports that Thermal Table has changed
[15485.631788] thinkpad_acpi: EC reports that Thermal Table has changed
[15507.413202] thinkpad_acpi: EC reports that Thermal Table has changed
[16270.568670] thinkpad_acpi: EC reports that Thermal Table has changed
[16385.055651] thinkpad_acpi: EC reports that Thermal Table has changed
[16970.244974] wlan0: deauthenticating from 80:b6:86:32:7f:6c by local choice (reason=3)
[16970.292856] cfg80211: All devices are disconnected, going to restore regulatory settings
[16970.292867] cfg80211: Restoring regulatory settings
[16970.292877] cfg80211: Calling CRDA to update world regulatory domain
[16970.303157] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[16970.303167] cfg80211: World regulatory domain updated:
[16970.303171] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[16970.303179] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16970.303186] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16970.303193] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16970.303199] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16970.303206] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16970.353025] tg3 0000:04:00.0: PME# enabled
[16970.353041] pcieport 0000:00:1c.5: wake-up capability enabled by ACPI
[16971.850374] PM: Syncing filesystems ... done.
[16971.868248] PM: Preparing system for mem sleep
[16972.364146] Freezing user space processes ... (elapsed 0.01 seconds) done.
[16972.380177] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[16972.396158] PM: Entering mem sleep
[16972.396247] Suspending console(s) (use no_console_suspend to debug)
[16972.397578] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[16972.397701] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[16972.397746] sd 1:0:0:0: [sdb] Stopping disk
[16972.397863] sd 0:0:0:0: [sda] Stopping disk
[16972.448645] [fglrx] IRQ 51 Disabled
[16972.448679] [fglrx] Preparing suspend fglrx in kernel.
[16972.450264] sdhci-pci 0000:15:00.2: PCI INT C disabled
[16972.450444] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[16972.450894] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[16972.452131] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[16972.452151] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[16972.456079] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[16972.456175] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[16972.456194] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[16972.464104] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[16972.480047] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[16972.552387] snd_hda_intel 0000:00:1b.0: PCI INT B disabled
[16972.568043] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.558 msecs
[16972.688451] [fglrx] Suspending fglrx in kernel completed.
[16972.688455] [fglrx] Power down the ASIC .
[16972.688503] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 239.901 msecs
[16972.688547] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 237.467 msecs
[16972.973989] PM: suspend of drv:sd dev:1:0:0:0 complete after 576.414 msecs
[16972.974021] PM: suspend of drv:scsi dev:target1:0:0 complete after 576.364 msecs
[16972.974051] PM: suspend of drv:scsi dev:host1 complete after 558.899 msecs
[16972.977334] PM: suspend of drv:sd dev:0:0:0:0 complete after 579.636 msecs
[16972.977365] PM: suspend of drv:scsi dev:target0:0:0 complete after 579.624 msecs
[16972.977395] PM: suspend of drv:scsi dev:host0 complete after 562.218 msecs
[16972.992139] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 541.844 msecs
[16972.992169] PM: suspend of drv: dev:pci0000:00 complete after 541.064 msecs
[16972.992196] PM: suspend of devices complete after 595.632 msecs
[16972.992199] PM: suspend devices took 0.596 seconds
[16973.040334] ehci_hcd 0000:00:1d.7: PME# enabled
[16973.040341] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[16973.056121] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[16973.056268] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[16973.056272] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
[16973.056535] ehci_hcd 0000:00:1a.7: PME# enabled
[16973.056539] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[16973.072121] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[16973.072187] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[16973.072192] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D2
[16973.072280] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[16973.072283] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D2
[16973.088331] PM: late suspend of devices complete after 96.127 msecs
[16973.088672] ACPI: Preparing to enter system sleep state S3
[16973.248157] PM: Saving platform NVS memory
[16973.251231] Disabling non-boot CPUs ...
[16973.252743] CPU 1 is now offline
[16973.253278] Extended CMOS year: 2000
[16973.253278] ACPI: Low-level resume complete
[16973.253278] PM: Restoring platform NVS memory
[16973.253278] Extended CMOS year: 2000
[16973.253278] Enabling non-boot CPUs ...
[16973.253278] Booting Node 0 Processor 1 APIC 0x1
[16973.253278] smpboot cpu 1: start_ip = 99000
[16973.252726] Calibrating delay loop (skipped) already calibrated this CPU
[16973.252726] Disabled fast string operations
[16973.267657] NMI watchdog enabled, takes one hw-pmu counter.
[16973.337147] CPU1 is up
[16973.344522] ACPI: Waking up from system sleep state S3
[16973.732217] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0x2020, writing 0x20002020)
[16973.732224] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[16973.732247] mei 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[16973.732271] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[16973.732273] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[16973.732301] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[16973.732328] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[16973.732331] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[16973.732334] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[16973.732364] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[16973.732378] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[16973.732381] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[16973.732408] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[16973.732433] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[16973.732435] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[16973.732438] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[16973.732474] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[16973.732493] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[16973.732499] ehci_hcd 0000:00:1a.7: PME# disabled
[16973.732502] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[16973.732505] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[16973.732545] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[16973.732585] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc071c061)
[16973.732590] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc050c040)
[16973.732595] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0xb0b0)
[16973.732606] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[16973.732663] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021)
[16973.732669] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0xa0a0)
[16973.732681] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[16973.732748] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[16973.732814] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[16973.732870] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001)
[16973.732876] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0, writing 0x9090)
[16973.732888] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[16973.732924] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[16973.732926] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[16973.732954] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[16973.732978] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[16973.732981] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[16973.732983] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[16973.733014] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[16973.733052] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[16973.733098] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[16973.733117] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[16973.733122] ehci_hcd 0000:00:1d.7: PME# disabled
[16973.733125] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[16973.733129] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[16973.733250] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[16973.733337] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100403)
[16973.733434] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[16973.733573] tg3 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x8f2e0000)
[16973.748024] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xdbdfec00-0xdbdfecff] (PCI address [0xdbdfec00-0xdbdfecff])
[16973.748058] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[16973.748066] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[16973.768098] r592 0000:15:00.4: BAR 0: set to [mem 0xdbdfe400-0xdbdfe4ff] (PCI address [0xdbdfe400-0xdbdfe4ff])
[16973.768144] r592 0000:15:00.4: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[16973.768153] r592 0000:15:00.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[16973.784164] r852 0000:15:00.5: BAR 0: set to [mem 0xdbdfe000-0xdbdfe0ff] (PCI address [0xdbdfe000-0xdbdfe0ff])
[16973.784202] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[16973.784212] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[16973.784919] PM: early resume of devices complete after 52.890 msecs
[16973.785436] mei 0000:00:03.0: irq 47 for MSI/MSI-X
[16973.785502] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[16973.785505] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[16973.785513] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[16973.785521] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[16973.785547] usb usb3: root hub lost power or was reset
[16973.785564] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[16973.785571] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[16973.785572] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[16973.785575] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[16973.785580] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[16973.785589] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[16973.785603] usb usb4: root hub lost power or was reset
[16973.785619] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[16973.785620] usb usb5: root hub lost power or was reset
[16973.785624] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[16973.785632] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[16973.785637] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[16973.785641] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[16973.785645] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[16973.785702] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[16973.785706] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[16973.785738] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[16973.785741] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[16973.785745] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[16973.785746] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[16973.785753] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[16973.785754] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[16973.785785] usb usb6: root hub lost power or was reset
[16973.785790] usb usb7: root hub lost power or was reset
[16973.785802] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[16973.785807] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[16973.785810] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[16973.785812] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[16973.785821] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[16973.785829] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[16973.785839] usb usb8: root hub lost power or was reset
[16973.785856] pci 0000:00:1e.0: setting latency timer to 64
[16973.785876] ahci 0000:00:1f.2: setting latency timer to 64
[16973.785929] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[16973.785932] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[16973.785938] fglrx_pci 0000:01:00.0: setting latency timer to 64
[16973.785939] pcieport 0000:00:1c.5: wake-up capability disabled by ACPI
[16973.785947] tg3 0000:04:00.0: PME# disabled
[16973.785963] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[16973.785965] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[16973.787394] sd 0:0:0:0: [sda] Starting disk
[16973.787453] sd 1:0:0:0: [sdb] Starting disk
[16973.790181] [fglrx] Power up the ASIC
[16973.790197] [fglrx] Preparing resume fglrx in kernel.
[16973.817395] [fglrx] Resuming fglrx in kernel completed.
[16973.817494] [fglrx] IRQ 51 Enabled
[16973.834410] legacy_resume(): pnp_bus_resume+0x0/0x70 returns -19
[16973.834415] PM: Device 00:0a failed to resume: error -19
[16973.837364] Extended CMOS year: 2000
[16973.904152] PM: resume of drv:hub dev:6-0:1.0 complete after 116.907 msecs
[16973.904175] PM: resume of drv: dev:ep_00 complete after 116.923 msecs
[16973.904181] PM: resume of drv: dev:ep_81 complete after 116.929 msecs
[16973.904215] PM: resume of drv:hub dev:7-0:1.0 complete after 116.936 msecs
[16973.904223] PM: resume of drv: dev:ep_00 complete after 116.913 msecs
[16973.904231] PM: resume of drv:hub dev:8-0:1.0 complete after 116.885 msecs
[16973.904241] PM: resume of drv:hub dev:3-0:1.0 complete after 117.043 msecs
[16973.904251] PM: resume of drv: dev:ep_00 complete after 116.868 msecs
[16973.904254] PM: resume of drv: dev:ep_00 complete after 117.059 msecs
[16973.904257] PM: resume of drv: dev:ep_81 complete after 116.896 msecs
[16973.904259] PM: resume of drv: dev:ep_81 complete after 116.965 msecs
[16973.904264] PM: resume of drv: dev:ep_81 complete after 117.073 msecs
[16973.904298] PM: resume of drv: dev:ep_00 complete after 117.066 msecs
[16973.904305] PM: resume of drv:hub dev:5-0:1.0 complete after 117.081 msecs
[16973.904325] PM: resume of drv: dev:ep_81 complete after 117.096 msecs
[16974.009500] PM: resume of drv: dev:ep_00 complete after 222.286 msecs
[16974.009516] PM: resume of drv:hub dev:4-0:1.0 complete after 222.310 msecs
[16974.009538] PM: resume of drv: dev:ep_81 complete after 222.328 msecs
[16974.036126] PM: resume of drv: dev:ep_00 complete after 248.964 msecs
[16974.036134] PM: resume of drv:hub dev:1-0:1.0 complete after 248.981 msecs
[16974.036144] PM: resume of drv: dev:ep_81 complete after 248.988 msecs
[16974.104125] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[16974.104156] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[16974.106244] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[16974.106247] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[16974.106250] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[16974.107130] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[16974.107134] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[16974.107138] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[16974.119725] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[16974.119728] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[16974.119731] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[16974.123262] ata1.00: configured for UDMA/133
[16974.142717] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[16974.142720] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[16974.142723] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[16974.146160] ata2.00: configured for UDMA/133
[16974.148127] usb 4-2: reset full-speed USB device number 3 using uhci_hcd
[16974.156573] PM: resume of drv:sd dev:0:0:0:0 complete after 369.172 msecs
[16974.156585] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 319.186 msecs
[16974.156600] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 369.161 msecs
[16974.165581] PM: resume of drv:sd dev:1:0:0:0 complete after 378.121 msecs
[16974.165613] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 378.126 msecs
[16974.294225] btusb 4-2:1.0: no reset_resume for driver btusb?
[16974.294229] btusb 4-2:1.1: no reset_resume for driver btusb?
[16974.392123] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[16974.540244] PM: resume of drv: dev:ep_00 complete after 752.677 msecs
[16974.540251] PM: resume of drv:usb dev:4-1:1.0 complete after 752.733 msecs
[16974.540262] PM: resume of drv: dev:ep_02 complete after 752.712 msecs
[16974.540280] PM: resume of drv: dev:ep_81 complete after 752.744 msecs
[16974.544219] PM: resume of drv:usb dev:4-2:1.0 complete after 756.621 msecs
[16974.544230] PM: resume of drv:usb dev:4-2:1.1 complete after 756.568 msecs
[16974.544233] PM: resume of drv:usb dev:4-2:1.3 complete after 756.473 msecs
[16974.544239] PM: resume of drv: dev:ep_02 complete after 756.594 msecs
[16974.544242] PM: resume of drv:usb dev:4-2:1.2 complete after 756.529 msecs
[16974.544245] PM: resume of drv: dev:ep_82 complete after 756.617 msecs
[16974.544250] PM: resume of drv: dev:ep_83 complete after 756.571 msecs
[16974.544252] PM: resume of drv: dev:ep_81 complete after 756.640 msecs
[16974.544255] PM: resume of drv: dev:ep_03 complete after 756.560 msecs
[16974.544258] PM: resume of drv: dev:ep_04 complete after 756.515 msecs
[16974.544260] PM: resume of drv:bluetooth dev:hci0 complete after 240.123 msecs
[16974.544262] PM: resume of drv: dev:ep_84 complete after 756.536 msecs
[16974.544268] PM: resume of drv: dev:ep_00 complete after 756.493 msecs
[16974.544273] PM: resume of devices complete after 759.297 msecs
[16974.544633] PM: resume devices took 0.760 seconds
[16974.544676] PM: Finishing wakeup.
[16974.544678] Restarting tasks ... done.
[16974.545614] video LNXVIDEO:01: Restoring backlight state
[16974.784042] usb 1-1: new high-speed USB device number 8 using ehci_hcd
[16974.920524] hub 1-1:1.0: USB hub found
[16974.920586] hub 1-1:1.0: 4 ports detected
[16975.208090] usb 1-1.1: new full-speed USB device number 9 using ehci_hcd
[16975.312653] input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
[16975.312778] generic-usb 0003:046D:C066.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:1a.7-1.1/input0
[16975.316579] input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
[16975.317451] generic-usb 0003:046D:C066.0004: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on usb-0000:00:1a.7-1.1/input1
[16975.404088] usb 1-1.2: new full-speed USB device number 10 using ehci_hcd
[16975.515841] hub 1-1.2:1.0: USB hub found
[16975.515938] hub 1-1.2:1.0: 3 ports detected
[16975.788202] usb 1-1.2.1: new full-speed USB device number 11 using ehci_hcd
[16975.884537] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input15
[16975.885183] generic-usb 0003:04B3:301B.0005: input,hidraw2: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1a.7-1.2.1/input0
[16975.886501] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input16
[16975.886609] generic-usb 0003:04B3:301B.0006: input,hidraw3: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1a.7-1.2.1/input1
[16976.185689] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[16976.188701] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[16976.245449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16976.246398] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[16976.275433] ADDRCONF(NETDEV_UP): eth0: link is not ready
[16979.384031] tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
[16979.384035] tg3 0000:04:00.0: eth0: Flow control is off for TX and off for RX
[16979.384846] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[16983.430388] wlan0: authenticate with b0:48:7a:d1:35:6c (try 1)
[16983.432791] wlan0: authenticated
[16983.433973] wlan0: associate with b0:48:7a:d1:35:6c (try 1)
[16983.438053] wlan0: RX AssocResp from b0:48:7a:d1:35:6c (capab=0x431 status=0 aid=4)
[16983.438062] wlan0: associated
[16983.450432] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[16984.604114] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = b0:48:7a:d1:35:6c tid = 0
[16989.880032] eth0: no IPv6 routers present
[16994.616045] wlan0: no IPv6 routers present
[17000.824101] tap0: no IPv6 routers present
[17004.336111] tap1: no IPv6 routers present
[32250.934381] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[32250.934649] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.934653] iwlwifi 0000:03:00.0: Error sending REPLY_ADD_STA: enqueue_hcmd failed: -5
[32250.934656] HW problem - can not stop rx aggregation for tid 0
[32250.934671] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.934674] iwlwifi 0000:03:00.0: Error sending REPLY_QOS_PARAM: enqueue_hcmd failed: -5
[32250.934676] iwlwifi 0000:03:00.0: Failed to update QoS
[32250.934680] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.934683] iwlwifi 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[32250.934685] iwlwifi 0000:03:00.0: Error clearing ASSOC_MSK on BSS (-5)
[32250.934691] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.934693] iwlwifi 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[32250.934696] iwlwifi 0000:03:00.0: Error clearing ASSOC_MSK on BSS (-5)
[32250.934699] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.934701] iwlwifi 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[32250.934703] iwlwifi 0000:03:00.0: Error clearing ASSOC_MSK on BSS (-5)
[32250.934706] wlan0: deauthenticating from b0:48:7a:d1:35:6c by local choice (reason=3)
[32250.952111] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.952118] iwlwifi 0000:03:00.0: Error sending REPLY_ADD_STA: enqueue_hcmd failed: -5
[32250.952124] ieee80211 phy0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-5)
[32250.954718] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.954722] iwlwifi 0000:03:00.0: Error sending REPLY_ADD_STA: enqueue_hcmd failed: -5
[32250.954726] ieee80211 phy0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-5)
[32250.954861] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.954864] iwlwifi 0000:03:00.0: Error sending REPLY_ADD_STA: enqueue_hcmd failed: -5
[32250.954867] ieee80211 phy0: failed to remove key (0, b0:48:7a:d1:35:6c) from hardware (-5)
[32250.954894] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.954896] iwlwifi 0000:03:00.0: Error sending REPLY_REMOVE_STA: enqueue_hcmd failed: -5
[32250.954899] iwlwifi 0000:03:00.0: Error removing station b0:48:7a:d1:35:6c
[32250.955680] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.955691] iwlwifi 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[32250.955693] iwlwifi 0000:03:00.0: Error clearing ASSOC_MSK on BSS (-5)
[32250.955700] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.955703] iwlwifi 0000:03:00.0: Error sending REPLY_LEDS_CMD: enqueue_hcmd failed: -5
[32250.955707] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.955709] iwlwifi 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[32250.955711] iwlwifi 0000:03:00.0: Error clearing ASSOC_MSK on BSS (-5)
[32250.955725] cfg80211: All devices are disconnected, going to restore regulatory settings
[32250.955729] cfg80211: Restoring regulatory settings
[32250.955735] cfg80211: Calling CRDA to update world regulatory domain
[32250.976063] iwlwifi 0000:03:00.0: Not sending command - RF KILL
[32250.976069] iwlwifi 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[32250.976073] iwlwifi 0000:03:00.0: Error clearing ASSOC_MSK on BSS (-5)
[32250.980468] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[32250.980472] cfg80211: World regulatory domain updated:
[32250.980474] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[32250.980477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32250.980480] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[32250.980482] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[32250.980485] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32250.980487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32251.064108] usb 4-2: USB disconnect, device number 3
[32251.257279] ADDRCONF(NETDEV_UP): wlan0: link is not ready